Hi all
I have a problem with a VPN connection between two sites. The VPN Tunnel is connected between an ASA and a Checkpoint Firewall. I'm responsible for the ASA.
The situation:
I have two networks on both Ends of the VPN tunnels with the same IP Subnet.
ASA-----------InterntRouter---Internet--Checkpoint-----
-----IP Subnet----------------------------------------------IP Subnet
-----10.10.10.0---------------Internet---------------------10.10.10.0
The VPN Tunnel is running. And the traffic shoud go from the 10.10.10.0 Subnet to the ASA and from then through the VPN Tunnel to the Checkpoint. What i have to do now is to NAT the 10.10.10.0 Subnet to another Adresse, but i don't know how to conifgure it because NAT (inside) is the same interface as the outside (Traffic comes clear in and goes crypto out of the same interface). Can i configure the VPN interface as NAT outside? How can i define this one? On the router i could use NAT with a RouteMap, but i couldn't find something similar on the ASA
Help is highly appreciated
cheers
patrick