02-18-2011 12:34 AM
Hi I was using WebVPN (clientless) with SSO on Exchange OWA 2003 and it was working fine with those SSO POST parameters:
URL: https://<mailserver>/exchweb/bin/auth/owaauth.dll
destination https://<mailserver>/exchange/
flags 0
username DOMAIN\CSCO_WEBVPN_USERNAME
password CSCO_WEBVPN_PASSWORD
SubmitCreds Log+On
forcedownlevel 0
trusted 0
Now, I'm trying to do the same with OWA 2010 and it doesn't work. I always receive an error about user credentials
For Exchange 2010, I use those parameters:
URL: https://<mailserver>/owa/auth.owa
destination https://<mailserver>/owa/
flags 0
username DOMAIN\CSCO_WEBVPN_USERNAME
password CSCO_WEBVPN_PASSWORD
SubmitCreds Log+On
forcedownlevel 0
trusted 0
Does anyone know how to fix?
Has anyone got it working?
Any help?
Thanks
Solved! Go to Solution.
03-04-2011 01:41 PM
In this setup, I had to change it to HTTP (customer related). It works over HTTPS as well.
Get this tool http://www.fiddler2.com/fiddler2/.
URL: http://internal-mail-server-ip/owa/auth/owaauth.dll
post-parameter:
destination: http://internal-mail-server-ip/owa/
flags: 0
forcedownlevel: 0
trusted: 0
username: CSCO_WEBVPN_USERNAME
password: CSCO_WEBVPN_PASSWORD
isUtf8: 1
Greets,
Norbert
Hope this help....please rate if helpful
02-28-2011 12:04 PM
Hi,
Have you tried "http capture"?
Here is my "Workaround" bookmark. I'll post the final bookmark (when I'm back in the office).....
http://
destination: http://
flags: 0
forcedownloadlevel: 0
trusted: 0
username: CSCO_WEBVPN_USERNAME
password: CSCO_WEBVPN_PASSWORD
isUft8: 1
BUT, the weird think is, when I hit the bookmark, the OWA (2010) login screen appears.
After klicking (once) on the "sign in" button on the OWA login page, go back to the WebVPN portal and click a second time on the bookmark the
access to the mailbox account is granted.
The same with the post-plugin.
Greets,
Norbert
03-04-2011 03:37 AM
it doesn't work for me. Incorrect credentials
http capture? how can i do that? does it works with https?
thanks
03-04-2011 01:41 PM
In this setup, I had to change it to HTTP (customer related). It works over HTTPS as well.
Get this tool http://www.fiddler2.com/fiddler2/.
URL: http://internal-mail-server-ip/owa/auth/owaauth.dll
post-parameter:
destination: http://internal-mail-server-ip/owa/
flags: 0
forcedownlevel: 0
trusted: 0
username: CSCO_WEBVPN_USERNAME
password: CSCO_WEBVPN_PASSWORD
isUtf8: 1
Greets,
Norbert
Hope this help....please rate if helpful
03-07-2011 12:45 AM
Great!
This parameters works for me, too (and with https)
Thank you very much
10-28-2011 03:05 AM
Hi!
Where can i set these parameter setting suggested? I´m using ASA5510 Version 8.4(1) and the post options i have in drop-down list is:
CSCO_WEBVPN_USERNAME
CSCO_WEBVPN_PASSWORD
Is this done via cli? If so how should i enter config mode for a specific bookmark and entry?
Regards,
Fredrik
10-28-2011 12:01 PM
Hi there,
See
under chapter "Configuring Post Parameters for SSO with Outlook Web Access".
Edit Bookmark, Advanced Options...
HTH,
Norbert
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide