01-28-2008 09:32 AM - edited 02-21-2020 03:30 PM
We have a customer who VPN's to a Pix 515. I inserted the same-security-traffic permit intra-interface configuration on the pix so that personnel who utilize teh VPN would be able to access one specific resource on the public side. What I would like to do is continue to use the same-security-traffic permit intra-interface command, but limit access to other resources to the VPN client. Can I assign an access list to the VPN client that would permit 10.10.10.10 to any and then deny all other connections? Where do I insert this in the VPN structure?
Thank you
Solved! Go to Solution.
01-28-2008 11:23 AM
01-28-2008 09:44 AM
You should be able to accomplish this using "vpn-filter value". Please refer the below URL for details.
Regards,
Arul
** Please rate all helpful posts **
01-28-2008 11:10 AM
Arul,
Is the VPNfilter a CLI command as well?
I do not have ASDM loaded.
Thanks
Dwane
01-28-2008 11:23 AM
Yes.
Regards,
Arul
** Please rate all helpful posts **
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide