VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Dear! When i start to upload/download data - tunnel goes down , when my speed more then 50 Mbps. Moreover, my Cisco 3925 goes to reboot and makes crashdump file after this (he is empty). This happens just when speed more then 50 Mbps. In other time -...

Hello.  We are using the ASA 5520 as Firewall and VPN gateway for remote access by employees and vendors.  Is there a way to view a history of VPN user logins?We used to have (or we still have but no longer using it) th CVPN 3005.  This device keeps ...

Hello everyone! I'm having some problems setting up a vpn tunnel between two cisco Asa's. The scenario is as follows One Asa 5506 (My side) and one 5550 (other side). Tunnel properties are as follows : Phase 1 Auth : Pre-shared key Encryp : Ike G...

dorcejose by Level 1
  • 599 Views
  • 2 replies
  • 0 Helpful votes

Hi Everyone, I'm having an issue with my anyconnect VPN set up. My ASA has multiple sub-interfaces for the different VLANs on my network. I'm able to establish a VPN connection with the anyconnect client and I can reach one of the vlans however I can...

Hello, I'm in the process of replacing our ASA 5510 running 8.2 to a new 5516x running 9.5.  I have about 25 L2L IPSEC VPNs currently configured.  Instead of creating 25 "nat (inside,outside) lines for NAT exemptions, can I use object groups and a si...

bhogue by Level 1
  • 247 Views
  • 2 replies
  • 0 Helpful votes

Hello guys I hope you're having fun with networks:D We recently bought two cisco 3850-48P-E for our buildings as core device ( actually 4 X 3850 to keep redundancy as high as possible in core block). We're planning to connect buildings using UBNT rad...

I am interested the following:There is Cisco 2901 v 15.4.(3)M4.There are also some L2L IPSec peers. Some of them use IKEv2 and others use IKEv1. There is an external interface.Is it possible to configure crypto-map that contains of mixed IKEv2 and IS...

RYShibrik by Level 1
  • 2376 Views
  • 1 replies
  • 0 Helpful votes

Hello, it has been asked me to configure on ASA a new vpn site-to-site. For this vpn I should set : crypto isakmp identity address crypto isakmp enable outside .. from my configuration crypto isakmp identity is auto and crypto isakmp is not enabled o...