04-27-2007 02:05 PM
Hello all,
Can someone direct me to some good documentation for planning and creating a dmz on an ASA 5520? Any advice or suggestions are greatly welcome.
TIA,
Gary
Solved! Go to Solution.
04-28-2007 12:48 PM
Hi Gary
Have a look at the following link,
Hope this helps.
Regards MJ
04-30-2007 01:10 PM
Gary,
You should also check out this doc. It provides several sample configurations that involve a DMZ.
PIX/ASA 7.x: Enable Communication Between Interfaces
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807fc191.shtml
Thanks,
Matt
04-28-2007 12:48 PM
Hi Gary
Have a look at the following link,
Hope this helps.
Regards MJ
04-30-2007 01:25 PM
Cannot express how helpful you guys are! Gary
04-30-2007 01:10 PM
Gary,
You should also check out this doc. It provides several sample configurations that involve a DMZ.
PIX/ASA 7.x: Enable Communication Between Interfaces
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807fc191.shtml
Thanks,
Matt
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide