I have the following dial up problem please help me overcome this problem
i have configured Cisco 2811 to be used as a dial up router with one E1, so that subscriber can dial in and use the internet.
the problem is that when adding "interface Group-Async1" the command (group-range 1 30) when i excute this command it indicates accepting the command but when i show config, i am still getting (group-range 1 1.
below is the show ver result.
STEL#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(21a), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Mon 29-Sep-08 16:02 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
STEL.Hargeisa uptime is 3 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-advipservicesk9-mz.124-21a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 2811 (revision 53.50) with 247808K/14336K bytes of memory.
Processor board ID FHK1204F3UT
2 FastEthernet interfaces
31 Serial interfaces
1 Channelized E1/PRI port
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
63808K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Hassan R.
