06-12-2012 08:43 AM - edited 02-21-2020 06:07 PM
We have configured a Cisco ASA 5505 with AnyConnect access. This works great. However, these users cannot seem to ping devices on the private network. We have configured all devices on the network with a 10.10.10.0/24 address space. The inside interface of the ASA i 10.10.10.1/24 and the VPN return addresses are 10.10.10.50 - 10.10.10.65/24.
They users can utilize SSH and Oracle or MySQL calls but cannot seem to ping. Obviously, I am over looking something.
Thank you.
Dwane
Solved! Go to Solution.
06-12-2012 12:37 PM
Hi Dwane,
Most likely, your ASA missing no-nat between inside interface and remote-vpn pool address range.
For quick trobule shooting, please post your config and please do not forget to remove security info from the config.
what version of your ASA?
thanks
Rizwan Rafeek
06-12-2012 12:37 PM
Hi Dwane,
Most likely, your ASA missing no-nat between inside interface and remote-vpn pool address range.
For quick trobule shooting, please post your config and please do not forget to remove security info from the config.
what version of your ASA?
thanks
Rizwan Rafeek
06-13-2012 06:56 AM
Rizwan,
That was it. I had the NAT exemption set from Inside, any and that was not the correct syntax. Great job. Thanks you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide