VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

I have recently configured our ASA 5510 to support L2TP remote access connections, however the connections seem to fail after Phase 1.the basic error from the isakmp debugging is:Jun 06 11:03:25 [IKEv1]: Group = DefaultRAGroup, IP = 166.248.0.43, QM ...

icondie by Level 1
  • 1434 Views
  • 4 replies
  • 0 Helpful votes

Excluded Network List does not seem to be valid for hardware clients. I need to do a site to site vpn with one side being dynamic ip'd and tunnel everything except a single destination. I am not able to find any information on this ... I can setup ea...

We have configured a Cisco ASA 5505 with AnyConnect access.  This works great.  However, these users cannot seem to ping devices on the private network.  We have configured all devices on the network with a 10.10.10.0/24 address space.  The inside in...

dpatkins by Level 1
  • 753 Views
  • 2 replies
  • 0 Helpful votes

Hi,We purchased an ASA 5505 (ASA5505-BUN-K9) and more recently purchased the license to upgrade it from 10 to 50 users (L-ASA5505-10-50).  I would like to provide remote access to users via AnyConnect - specifically, AnyConnnect on Windows plus the i...

Is there a feature in Anyconnect VPN where all DNS queries go through the VPN tunnel? Basically we don't want ISP DNS server to be contacted at all. Whenever client connects to Anyconnect, all DNS queries should be sent through the VPN tunnel adapter...

Hey all.I have added a 2511 Access Server to my CISCO rack to make it easier to study. I have everything setup the way CISCO and other websites state it should be done and when I go to connect to one of my Routers/Switches, I get the following:Trying...

Dears,I have a network that contain (router 1941, ASA5510, and 3560 switch) the LAN users can access the Internat and they already connected with another site via site to site VPN.The problem is the oulook disconnected from the Exchange that hosted i...

Today we had a very disturbing failure.  We have a fully functional VPN on our ASA 5510 adaptive security device running 8.2(5).  I was setting up a new user on a Windows 7 Professional 64 bit machine using FireFox instead of Internet Explorer.The in...

I am in the process of buying some form of simple gateway/firewall box for our network. Our primary needs are basic firewalling and UTM, and usable SSLVPN support. I am currently considering a SA520 or 540 for this role.I am trying to better understa...

Resolved! DMVPN on ASA

HiIs it possible to configure the DMVPN on ASA?, if yes then how.I know DMVPN is not possible on PIX.My problem is to configure the site-to-site VPN between two sites, first site having lease line with fix public IP and second site having ADSL with d...

vashdevt by Level 1
  • 28421 Views
  • 5 replies
  • 0 Helpful votes

Hello everybody, I'm quite new with ASA configurations, and I am having some problems with a VPN configuration. I've configure a VPN wich unexpectedly goes down. the strange is that the other side of the tunnel still have connectivity. another strang...

mcrespima by Level 1
  • 1150 Views
  • 5 replies
  • 0 Helpful votes