cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
48905
Views
15
Helpful
9
Replies

Cisco Router 1941 - crypto isakmp policy command missing - IPSEC VPN

Ranbeckycr_2
Beginner
Beginner

Hello everyone,

I have been looking around and I can not find the " crypto isakmp policy " command on this Cisco Router 1941.  I just wanted to setup a regular IPSEC Lan to Lan tunnel and surprise, the command is not there.  Do I have the wrong IOS? I thought that a K9 image would do the trick.

Any suggestions are appreciated

This is what I get:

Router(config)#crypto ?
  ca   Certification authority
  key  Long term key operations
  pki  Public Key components

SHOW VER

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 10-Mar-10 22:27 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)

Router uptime is 52 minutes
System returned to ROM by reload at 02:43:40 UTC Thu Apr 21 2011
System image file is "flash0:c1900-universalk9-mz.SPA.150-1.M2.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command

This product contains cryptographic features ....

Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
Processor board ID FTX142281F4
2 Gigabit Ethernet interfaces
2 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)

License Info:

License UDI:

-------------------------------------------------
Device#   PID   SN
-------------------------------------------------
*0     CISCO1941/K9          FTX142281F4   

Technology Package License Information for Module:'c1900'

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot 
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      None          None          None
data          None          None          None

Configuration register is 0x2102

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

You would need to obtain the Security feature license in order to configure IPSec VPN.

Currently you have "none" for the Security feature:

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot 
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      None          None          None
data          None          None          None

Here is the more information on licensing on 1900 series router:

http://www.cisco.com/en/US/partner/docs/routers/access/1900/hardware/installation/guide/Software_Licenses.html

View solution in original post

9 Replies 9

Jennifer Halim
Cisco Employee
Cisco Employee

You would need to obtain the Security feature license in order to configure IPSec VPN.

Currently you have "none" for the Security feature:

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot 
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      None          None          None
data          None          None          None

Here is the more information on licensing on 1900 series router:

http://www.cisco.com/en/US/partner/docs/routers/access/1900/hardware/installation/guide/Software_Licenses.html

That was really fast!! thank you, I will talk to my provider.

Thanks. had the same problem and was able to resolve it using the provided link. Thanks.

Me too, Kindly help me.

thanks this link but i unable to open any forms and url.

 

so kindly do me help please.

I get the same proble with my cisco 1921, 

it's the simple to solve .
In config mode just type this commande "license boot module c1900 technology-package securityk9 "

 

Config}# license boot module c1900 technology-package securityk9
 
After that valide the command and accept the agreement .
Save your running-config and reload . it' s okay now 

And how long is the license?

Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Evaluation securityk9
data None None None

I get the same problem with cisco 1921, your links help me so much.
In config mode to enable crypto and security license, just type 

Config}# license boot module c1900 technology-package securityk9
 
After it will ask you to accept an agreement , type yes , save the running-config and reload ; it' s ok now 

haneef001
Beginner
Beginner

Kindly follow this blog .

It shows you how to install the security license 

http://ciscofortinet.blogspot.com/

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers