Cisco VPN Secure Client 3.5.2 vs. Cisco 827H running IP/FW, NAT, and 3DES

[L.Druett]

Hi There,

Have been having fun and games as well as going through all the sample configs, howto's, etc.

The VPN client terminates, you can ping, connect to windows shares across the network, and send a file to the share, however, you can't retrieve any file from the site to the VPN client, and the VPN client can't run a Terminal Services Client through the VPN to a Win2K terminal server.

Any clues ?

[afakhan]

Hi,

Please use the utlitity that comes with the Cisco VPN Client called setMTU, and set your ethernet (NIC) MTU to a lower value , say 1200 bytes.

you can use this tool, to avoid playing with the registry :

http://www.dslreports.com/front/drtcp.html

Thanks,

Afaq

[L.Druett]

Thanks for that, it worked very well.

[hspaander]

Hi there,

I am working now for a couple of weeks to get VPN client <>cisco 825 /NAT up and running but still having problems. Are you also running the client behind a NAT device? Can you show me the vpn details of your config?

Thanks Hans