I've found tutorials and guides on how to configure AnyConnect on an ASA5505, but I wanted to check before to make sure I was going the right direction.
Setup:
I have a very simple setup and basic goal. I currently just have one laptop on E0/1 of my ASA5505 and then the ASA configured with a static IP plugged to the Internet. I have the ASA correctly configured and can browse the web through the laptop.
I also have the AnyConnect and AnyConnect Mobile licenses as well.
Goal:
I want to set up AnyConnect on the ASA5505 and just establish a successful connection from an android mobile device running the necessary AnyConnect software from the market.
===========
There are lots of guides for specifc set ups, but as described, I want to keep this as simple as possible.
Would this be a good guide to be able to complete this?
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080972e4f.shtml
Also, I'm more comfortable with the CLI. Is it simpler to use the ASDM wizard for this?
Thanks in advance.