08-09-2006 06:08 AM - edited 02-21-2020 02:34 PM
Hi All,
I need to Configure VPN between PIx 506E
and 3005 Concentrator
but the pix end doesn't have a public IP
the tunnel is terminated at the DSL modem end
So i need Configure Pix like a VPn client ."If I configured it in base group does it affect my exsisting VPN tunnels"
Please advice
Thanks,
Krishna.
08-09-2006 07:27 PM
HI .. it might affect your existing vpn tunnels as the specific groups get their configs from the defautl group when there are not values specified at the specific group level. I suggest you creating a new group for you PIX. Below a brief example of the config you need to apply to your PIX.
vpnclient server
vpnclient mode network-extension-mode
vpnclient vpngroup
vpnclient username
vpnclient enable
I hope it helps .. please rate it if it does !!!
08-10-2006 01:15 AM
Hi Fernando,
Thankyou for your reply But Behind the PIx end I need to connect 5 machines in that case does it helps
and I need to define acls for accessing 5 diff networks
ex
if pix internal has 10.1.1.0/24 and it need to connect diff subnets which is behind the Concentrator how i Have to Do the Configuration .
if you have Documantation or model Configuration Please send me
Thanks
Krishna.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide