05-30-2014 05:46 AM
Hi all,
i would ask you how can i modify my ip dhcp excluded-address .
My situation is like below:
ip dhcp excluded-address 10.22.93.1 10.22.93.20
ip dhcp excluded-address 10.22.93.199 10.22.93.254
!
WIFI
network 10.22.93.0 255.255.255.0
default-router 10.22.93.1
lease infinite
I would modify ip dhcp excluded-address 10.22.93.199 10.22.93.254 in ip dhcp excluded-address 10.22.93.230 10.22.93.254
it's enought do:
no ip dhcp excluded-address 10.22.93.199 10.22.93.254
ip dhcp excluded-address 10.22.93.230 10.22.93.254
Please answer me.
Regards
Paolo
05-30-2014 06:19 AM
clear ip dhcp bindings
05-30-2014 06:23 AM
So i need to do:
conf t
no ip dhcp excluded-address 10.22.93.199 10.22.93.254
ip dhcp excluded-address 10.22.93.230 10.22.93.254
clear ip dhcp bindings
exit
wr mem
Right?
06-03-2014 01:19 AM
Please answer me
Regards
Paolo
06-09-2014 12:24 AM
Use
This command prevents IP addresses from being assigned by the router's DHCP server. This is used to prevent IP conflicts with statically assigned servers and routers.
Syntax
Router(config)#ip dhcp excluded-address <low IP> <high IP>
Example
First we configure the DHCP server with ip dhcp pool and exclude the ip addresses.
R2(config)#ip dhcp pool R1_Pool
R2(dhcp-config)#network 10.22.93.0 /24
R2(dhcp-config)#dns-server 4.2.2.2
R2(dhcp-config)#default-router 10.22.93.1
R2(dhcp-config)#exit
R2(config)#ip dhcp excluded-address 10.22.93.230 10.22.93.254
Currently R1's Fa0/0 does not have an IP address
R1(config-if)#do show ip interface brief | ex unass
After we configure ip address dhcp on R1's Fa0/0, it receives an IP address of 10.22.93.1
R1(config)#int fa0/0
R1(config-if)#ip address dhcp
R1(config-if)#
*Mar 1 00:40:36.339: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 10.22.93.2 (FastEthernet0/0) is down: address changed
R1(config-if)#
*Mar 1 00:56:44.903: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0/0 assigned DHCP address 10.1.1.100, mask 255.255.255.0, hostname R1
R1(config-if)#
*Mar 1 00:41:21.567: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 10.22.93.2 (FastEthernet0/0) is up: new adjacency
R1(config-if)#
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide