01-25-2005 07:15 AM - edited 02-21-2020 01:34 PM
I have created an IPSEC VPN Tunnel to my PIX, I am using the Cisco VPN Client on my laptop to connect in.
The problem I am having is that I can not access anything by hostname, I have to use IP Addresses.
Is there a way that I can set up the pix to forward me my internal DNS server addresses?
Solved! Go to Solution.
01-25-2005 09:59 PM
Hi,
Yes. you can.. you have to configure the dns server's ip address on the vpn group command.
vpngroup abc dns-server 192.168.1.10 192.168.1.11 (backup)
For more information see the PIX firewall command reference for vpngroup:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/tz.htm#wp1099471
hope this helps.. all the best..
Raj
01-26-2005 05:37 AM
hii
thanks.. can you please mark the case as solved one so that others can use it ? rate replies if found useful..
Raj
01-25-2005 09:59 PM
Hi,
Yes. you can.. you have to configure the dns server's ip address on the vpn group command.
vpngroup abc dns-server 192.168.1.10 192.168.1.11 (backup)
For more information see the PIX firewall command reference for vpngroup:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/tz.htm#wp1099471
hope this helps.. all the best..
Raj
01-26-2005 05:36 AM
Thanks Raj, worked great!
01-26-2005 05:37 AM
hii
thanks.. can you please mark the case as solved one so that others can use it ? rate replies if found useful..
Raj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide