Easy VPN between 877 & 3845

[jitendra_pipalia]

Dear All

I whould like to establish EASY VPN between 877 and 3845.

Following information

1. 3845 already i am using for DMVPN ,gi0/1 is given publich ip

2. I want to terminate same easy vpn on dmvpn router

I am getting following message on my easy vpn remote router

Feb 19 19:50:04.241: ISAKMP:(0): processing vendor id payload

*Feb 19 19:50:04.241: ISAKMP:(0): vendor ID is Unity

*Feb 19 19:50:04.241: ISAKMP:(0): processing vendor id payload

*Feb 19 19:50:04.241: ISAKMP:(0©o0):Checkingàlicy

*Feb 19 19:50:04.245: ISAKMP: encryption 3DES-CBC

*Feb 19 19:50:04.245: ISAKMP: hash SHA

*Feb 19 19:50:04.245: ISAKMP: default group 2

*Feb 19 19:50:04.245: ISAKMP: auth XAUTHInitPreShared

*Feb 19 19:50:04.245: ISAKMP: life type in seconds

*Feb 19 19:50:04.245: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B

*Feb 19 19:50:04.245: ISAKMP:(0):Encryption algorithm offered does not match policy!

*Feb 19 19:50:04.245: ISAKMP:(0):atts are not acceptable. Next payload is 0

*Feb 19 19:50:04.245: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65516 policy

*Feb 19 19:50:04.245: ISAKMP: encryption 3DES-CBC

*Feb 19 19:50:04.245: ISAKMP: hash SHA

*Feb 19 19:50:04.245: ISAKMP: default group 2

*Feb 19 19:50:04.245: ISAKMP: auth XAUTHInitPreShared

*Feb 19 19:50:04.245: ISAKMP: life type in seconds

*Feb 19 19:50:04.245: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B

can u tell me wht is wrong with my config on both the router

i have did configuration using SDM and followed the document for easy vpn remote form cisco sites.....

[ggilbert]

Can you please send me the config of your 3845 router.

Thanks

Gilbert

[jitendra.pipalia]

Find attached configuration for Easy vpn remote NEM mode

as well as 3845 router