I am using an 1811 router as an easy VPN client with and ASA 5520 serving as the Easy VPN server. I have a working configuration on the router, but am frustrated by the fact that I am required to perform the "crypto ipsec client ezvpn xauth" and enter the user name and password from the command from the CLI in order to bring up the VPN. I have configured the ASA to allow the client to store the username and password, and have configured a username and password under the crypto ipsec client ezvpn configuration, and it now holds and uses these credentials if I clear the tunnel, but if I reset the router I have to manually enter the credentials again. I cannot deploy these in this manner. is there a way short of turning off the xauth requirement to make the 1811 pass the credentials automatically.