Enabling SSH on Cisco 4507

[zaqtivi]

How do you configure ssh on Cisco 4507 ? I did "show ip ssh" and the log below is displayed as a result.

Router#show ip ssh

SSH Disabled - version 1.99

%Please create RSA keys to enable SSH (and of atleast 768 bits for SSH v2).

Authentication timeout: 120 secs; Authentication retries: 3

Minimum expected Diffie Hellman key size : 1024 bits

IOS Keys in SECSH format(ssh-rsa, base64 encoded): NONE

Thanks.

[mvsheik123]

Hi,

Check this link..

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

aaa related commands are not mandatory. You can even use local authentication. Also, make sure the IOS supports SSH.

Do 'Shoe version' the IOS name contains 'k9' for crypto.

hth

MS