EZVPN on PIX version 8.0

[lquin1978]

The vpnclient command will not work on my PIX 515 running v8.0.. any ideas?

[mvsheik123 · Accepted solution]

Hi,

This command applies to 5505. check the OS command ref guide.

vpnclient enable

Usage Guidelines

This command applies only to the ASA 5505.

If you enter the vpnclient enable command, the ASA 5505 functions as a Easy VPN hardware client (also called "Easy VPN Remote").

hth

MS

[lquin1978]

Thanks.. if you have a headsite with multiple EZVPN clients connected in a star configuration can you have one remote site connect to another remote site using the intra-interface command and modifying the encryption domain?

[mvsheik123]

Hello,

Not quite sure what you mean by 'modifying the encryption domain' but yes.. both spokes can connect initiate traffic via the Hub with 'intra-interface' command and with proper ACLs in place on Hub ASA/PIX. And if you are planning on creating dedicated L2L tunnel between both spokes while acting as ezvpn clients - I don't think you can do that.

hth

MS