Hi,
I want to implement two layers of firewalls, using two FWSM contexts. I know that two virtual firewalls cannot be cascaded (usupported design), but in my case, both contexts do not share any vlan, so it is not pure cascading. Here is what I would like to install :
VLAN100--FW1--VLAN200--MSFC--VLAN300--FW2--VLAN400
The inside interface of FW1 is VLAN200 and the inside interface of FW2 is VLAN400.
Is this configuration suported ?
Thank you
Yves Haemmerli