10-14-2012 12:57 AM
hi can anyody breif me,
we can use GET VPN on the public WAN or only we can private WAN like MPLS.
if we can use in public wan how to proceed and requirements to proceed?
thnaks
cyril
10-14-2012 04:32 AM
Hello Cyril,
Getvpn is not a good solution over internet as your enterprise subnets are not routable over internet.Also You will have issues while using NAT.
DMVPN is a better solution over the public internet.
Hope this helps
Harish.
10-14-2012 04:45 AM
Hello,
GETVPN over internet would work only if:
Most likely you might have a look to a solution like ikev2 flexvpn. That's what you might need.
Cheers
10-14-2012 06:59 AM
DMVPN only works with Cisco devices. Otherwise, you will have issues if you have devices such as Nokia/Checkpoint.
GRE/IPsec is a much better choice in a multi-vendors environment. Nokia IP platforms also support GRE/IPSec as well.
10-14-2012 11:42 PM
Hi,
As mentioned before, due to the IP preservation feature offered by GET VPN, this is not an option if you are planning to deploy this scenario over the Internet,
On the other hand, DMVPN, VTI, Flex VPN and GRE/IPsec offered a better a solution.
Nevertheless, this depends on your needs and what you need to accomplish.
Please chek this out:
Cisco Site-to-Site VPN Technologies Comparison
In case you dont have any further questions, please mark this post as answered and rate any helpful posts
Hope to help.
Portu.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide