How can I connect Windows 10 (behind NAT) to RV042

[Remiasz_W]

Hello

I have two RV042 (in two localization) connected together with IpSec site-to-site.

I try to connect my Windows 10 to RV042 from home behind NAT.

I tried many combination of parameters to built-int client but still cannot connect.

Can someone help me?

RV has static IP and domain name.

My home router has dynamic IP.

[MHM Cisco World]

R1-R2 there is site-to-site IPSec

you want PC window to connect to one of them?

[balaji.bandi]

RV042 has already site to site vpn, you do not need any other VPN, you need to able to access other side resource.

what exactly you trying to do here ? do you 2 different RV042 or you have all same RV042 ?

[Remiasz_W]

Routers connects central office with other offfice.

I try to connect my PC from home to central office.

[MHM Cisco World]

This is not relate to site to site vpn

you need remote access ipsec to access to router.

make new policy and apply it to outside.

[Remiasz_W]

Yes, this is what I need

I tried "Client to Gateway" and "VPN Client Access" in RV042 but Ipsec client built-in Windows cannot connect.