How to configure a terminal server using cisco 2600 router

[King Wang Anderson Mok]

I want to use the nm-4a/s in the 2600 router to connect to serval cisco device using the console port. but what type of cabel should be use in nm-4a/s 2600 to other cisco device console port

[jsivulka]

Connect the terminal using the blue RJ-45-to-DB-9 adapter cable. I think the following URLs has what you are looking for.

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a008014f8e7.shtml

http://www.cisco.com/en/US/docs/routers/access/2600/hardware/installation/guide/2600ch3.html#wp1063191