how to configure multiple dialed number on cisco AS5350?

[walleed222]

We have Cisco AS5350 configured for remote access and it is connected to E1 and currently all the incoming calls to that E1 will be received and assigned IP from local pool configured on the box, Now we have new requirements to direct new dialed number to the AS and assign IP's from different pool for the people who dialing the new number , how we could recognize between the incoming calls based on the dialed number and assign them to difrent async group ? 

[Dennis Mink]

can you please include the config that you currently have.

Thanks

[walleed222]

Please find the related configuration below : 

controller E1 3/0
framing NO-CRC4
ds0-group 1 timeslots 1-15,17-31 type r2-digital r2-non-compelled
cas-custom 1
debounce-time 10
seizure-ack-time 10

interface Group-Async1
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
async mode interactive
no snmp trap link-status
peer default ip address pool ThePool
compress mppc
no fair-queue
ppp multilink
group-range 1/00 1/59

line 1/00 1/59
exec-timeout 0 0
no flush-at-activation
script startup default
modem InOut
modem autoconfigure type nextport
autoselect during-login
autoselect ppp

so can I create new async group and assign it to the caller on the new number?