Hi,
I have to monitor several VPN locations in Cisco Secure.
In all locations there are 5-10 workstations and one print server. The VPN is realized in Network Extension Mode with a Pix501 in the outside locations and VPN Concentrator 3005 in the central side. We monitor the print server because it is allways powered on. But if all workstations are powered off and we got a change of the dynamically allocated IP address on the pix, no new VPN tunnel would be established. So we can´t poll the print server. If one workstation is powered on the VPN tunnel is going up and anything is working fine.
I should have a solution to monitor the print server if all workstations are being powerde off.
Thanks for any suggestions !