How to route traffic to one specific website over split tunnel VPN?

[ccormier]

I need my users at home to be able to access a website that is only accessible from the IP address at our corporate office.  But currently we have them set so that their internet traffic is split from their VPN usage.  Is there a way to get ONLY traffic to this website to tunnel through the VPN and all other web traffic to still go out through their local internet connection?

[balaji.bandi]

you can do with dynamic split tunning ( have a look below guide - hope that help you:)

https://www.cisco.com/c/en/us/td/docs/security/asa/asa98/asdm78/vpn/asdm-78-vpn-config/vpn-asdm-setup.html#task_ydq_tbw_tz

https://community.cisco.com/t5/security-documents/dynamic-split-tunneling-in-anyconnect-vpn/ta-p/3773878

[Rob Ingram]

Hi,
You need to include the IP address(es) of the website in the split tunnel ACL to ensure it is routed back through the VPN tunnel. You would also then need to ensure you have the NAT rules in place to hairpin the traffic on the ASA and route back out of the ASA to the destination.

HTH