02-27-2006 12:12 AM - edited 02-21-2020 02:16 PM
I am going to setup IPsec connections between head office and branches
(around 300).
What is the most scalable approach for this Hub-and-spoke configuration ?
03-02-2006 02:31 PM
here are some documents that explains about some of the good approaches available for configuring "Hub and Spoke" configuration.
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009463b.shtml
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080093dc8.shtml
03-02-2006 10:08 PM
You might want to consider implementing DMVPN (Dynamic Multipoint IPsec VPNs )scalable soultion for your Hub-and-spoke.
See below document on how to set up DMVPN.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide