ipsec tunnel from 804 to vpn conc. 3030

[jpoulos]

I can't get the tunnel to come up on the ISDN link. I've tested my configs locally and it works when I apply the crypto map to the ethernet int. But when I connect to the internet using an ISDN connection and applying the crypto map to the dialer1 interface, I can't get the tunnel to come up. Any suggestions or links are greatly appreciated.

JPoulos

[gfullage]

If you're running lower than 12.2(13)T then you need to apply the crypto map to both the physical and the logical interface, in other words apply it to both the BRI AND the dialer interface.

[jpoulos]

the IOS actually did that automatically when I applied the crypto map to the dialer1 interface. My problem ended up being a misconfigured access-list. Thanks for your help