Hi, I just want to know, how I can create the ipsec VPN over ATM sub interface in router.
Network details we have POP in US and client is connected to US pop viat1 line and it is terminated to serial port and from US pop to my Location we are having E1 connectivity. And it connected to again serial port of the router.
And VPN is created end to end.
Now we are going for ATM Network between My locations to US pop.
The question is can we create the same VPN over the ATM sub interface on my side and customer end Serial.
Pls advise.
Configuration of ATM in router.
interface ATM1/0
no ip address
no ip route-cache
no ip mroute-cache
no atm ilmi-keepalive
scrambling-payload
impedance 120-ohm
!
interface ATM1/0.100 point-to-point
ip address 11.1.1.50 255.255.255.252
no ip route-cache
no ip mroute-cache
pvc 0/100
vbr-nrt 800 800 94
oam-pvc manage