Is possible to NAT more than one public IPs to one internal IP on ASA 5505?

[haluochen9988]

Thank you in advance for the reply.

Regards,

[Julio Carvajal]

Hello,

You mean access the same internal host using different global o public Ip addresses?

If that is the question, yes it can be done.

What version are you running?

Regards,

Julio

[haluochen9988]

Thanks Julio for the prompt reply.

I am using 8.2(2).

How to do that?

When I was trying to NAT a secondary public IP to the same internal IP on ASDM, I got the following error msg:

"The modified Static NAT Rule cannot be configured, as it overlaps with following existing rules"

[Julio Carvajal]

Hello,

static (inside,outside) 4.2.2.2 10.10.100.180

access-list test permit ip  10.10.100.180 255.255.255.255 any

  static (inside,outside) 4.2.2.3 access-list test

INFO: overlap with existing static

  inside:10.10.100.180 to outside:4.2.2.2 netmask 255.255.255.255

As you see this time is not an error message is just an INFO message

Regards,

[haluochen9988]

Thank you jcarvaja. I will try the command line later today.

But how come on ASDM it was an error and won't let me go thougth?

[Julio Carvajal]

Hello,

That is because you are not doing it as I am doing it ( With an ACL,etc)

Try it, that will work!

Just remember to rate all the post, that does not hurt anyone