04-15-2009 01:17 AM
BRI2/0 is up, line protocol is up (spoofing)
Hardware is BRI
History table has a maximum of 100 entries for disconnected calls.
History table data is retained for a maximum of 15 Minutes for disconnected calls.
--------------------------------------------------------------------------------
Call Calling Called Remote Seconds Seconds Seconds Charges
Type Number Number Name Used Left Idle Units/Currency
--------------------------------------------------------------------------------
Out +6567689760 0 0
--------------------------------------------------------------------------------
ISDN BRI2/0 interface
dsl 8, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 8 CCBs = 0
The Free Channel Mask: 0x80000003
00:17:15: %ISDN-6-LAYER2UP: Layer 2 for Interface BR2/0, TEI 80 changed to up
000673: 00:17:25: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to up
000674: 00:17:25: %ISDN-6-CONNECT: Interface BRI2/0:1 is now connected to 006567689760
000675: 00:17:26: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to down
000676: 00:17:36: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR2/0, TEI 80 changed to down
can anyone help...
04-15-2009 02:16 AM
The interface connects ok, you likely have a ppp problem, check debug ppp neg, debug ppp auth.
04-20-2009 01:52 AM
can i see the config done
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide