Multiple VLAN configuration for Anyconnect users.

[Sagarphadatare44]

Greeting,

I need your expertise in VLAN related configuration for anyconnect on Firepower FTD.

In our setup, IP assignment to Remote Access users is done by Radius server. Radius server also configured to assign different VLAN IDs to different region users. I want to understand how I need to configure those VLANs on FTD? Do I need to configure sub-interfaces and assign vlans to them?

All users will be using same applications, so how should I configure routing on FTD so specific sub-interface will be preferred for specific region user?

Thanks for your help in advance.

[balaji.bandi]

Below URL help you to understand how you need to configure VLANs and any connect VPN configuration.

https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html

https://www.cisco.com/c/en/us/td/docs/security/firepower/621/fdm/fptd-fdm-config-guide-621/fptd-fdm-ravpn.html