I have a IPsec tunnel between Site A and Site B. I have applied policy based routing to send all traffic of 192.16.10.100 to site B.
On site B, I want to use NAT to forward traffic of 192.168.10.100 received from tunnel to internet.
Remaining all users of subnet 192.168.10.0 are using internet from site A where as only 192.168.10.100 has to go to SITE B via tunnel and then use internet of Site B. The tunnel between SITE A and SITE B is established via tunnel.
SITE B
interface GigabitEthernet0/1/0
ip address 173.240.184.126 255.255.255.252
load-interval 30
negotiation auto
crypto map GCX_MAP
end