cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
864
Views
0
Helpful
3
Replies

Need help with setting up VPN urgently

niLuxx
Level 1
Level 1

 Dear Community,

 

Unfortunately I have a relatively urgent situation. I need to enable a VPN connection to our new ASA 5508-X and I'm struggling with the setup.

We have the following architecture:

 

CLIENT (HomeOffice) <=> Internet <=> Router (FritzBox) <=> ASA5508-X

 

I already setup a DynDNS for the FritzBox-Router and enabled full-access to ASA5508-X from internet. That means the ASA5508-X should be reachable from outside, with the usage of the DynDNS name of the Fritzbox.

 

I wanted to use Windows 10 Client for VPN now and asked my self how to access the ASA5508-X. I set all config as described on the ASA, but I wonder what hostname:<Port> I have to use know, since the ASA is only reachable via DynDNS.

 

Greetings

niLuxx

 

1 Accepted Solution

Accepted Solutions

You should have CCO account, or registered user or contact Cisco partner to download.

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

Look at the example :

 

https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/119006-configure-anyconnect-00.html

 

If you have DynaDNS Setup, that should resolve with your dynamic ip.

 

so you configured your windows anyconnect client mydomain.com(this is what you register dynadns domain).

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Do you know where I can get the AnyConnect packages from? The ASA5508-X comes with 2 valid licenses but I'm not allowed to download them

You should have CCO account, or registered user or contact Cisco partner to download.

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help