01-13-2004 07:54 PM - edited 02-21-2020 01:00 PM
We are temporarily using a PIX 506e to terminate VPN connections. We have set up the PIX to allow our administrators to use the Cisco VPN client to land directly on the interior of our LAN. Every application works (Outlook, all admin tools, etc) with the exception of one tool, Funk Proxy. It's a remote control app that we use to control all servers and PC's on our network. The app can poll all clients on the network and that part works fine. But when you attempt to connect to a machine it prompts for the password as it should and then connects. But it will only paint a few lines of the desktop then stop. After about ~20 seconds it errors out saying the client ended the connection. We currently use this Funk Proxy app with a Nortel Contivity VPN and it works fine.
Any ideas what on the PIX could be causing this problem?
Thanks
01-14-2004 02:40 AM
i can not say what the issue is here but it would be good to get some debugs:
debug crypto ipsec
debug crypto isakmp
this would help you to solve this. post any helpful debugs and we might be able to help
sam
01-16-2004 09:46 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide