05-04-2004 06:04 AM
Hello,
I have a question on the PIX PDM, mainly, how can I create an ACL with the established function using PDM?.
To give a better view of what I am trying to achieve, I have a DMZ on my PIX which I want only established connections to be returned to my inside network (I will limit incoming traffic from the inside to the DMZ on the Inside interface), however at the same time, I need full access from the DMZ to the Internet.
Thanks
Dione
Solved! Go to Solution.
05-10-2004 06:23 AM
Established is a unsupported command on the PDM currently
05-10-2004 06:23 AM
Established is a unsupported command on the PDM currently
05-12-2004 06:59 PM
Hi Dione,
There is very limited functions that you can do with the PDM, however dont using the conduit command in the CLI to achieve what you are doing as you will get an error in the PDM.
The best way to acheive this is use the below commands
static (inside,dmz)
Hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide