cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
404
Views
0
Helpful
4
Replies

PIX-to-PIX VPN tunnel problem

rmv72
Level 1
Level 1

I have PIX-to-PIX VPN tunnel.

i started ping to PIX2 outside interface and reply always stable ( near 50 ms) but if i ping PIX2 inside interface than reply is very various ( more 300 ms and until 1500 ms).

If i start ping to internal interface with packet size 10000 than i get reply near 1000ms but reply from outside interface still near 50-80 ms.

How to unserstand it and how to resolve it?

4 Replies 4

pkinzel
Level 1
Level 1

The encryption you are using may be killing system resources. What kind of encryption are you using? And which model of Pix?

I did some testing and found AES-128 to be the best bet for security and speed (AES-256 killed my 501 and 506s).

Login to PDM (at least version 3) and watch the Processor and Memory to see if they are getting maxed out.

PIX 501E

PIX Version 6.3(3)

crypto ipsec transform-set AES esp-aes esp-sha-hmac

crypto map M 10 ipsec-isakmp

crypto map MOSCOW 10 set transform-set AES

crypto map MOSCOW interface outside

isakmp identity address

isakmp policy 20 authentication pre-share

isakmp policy 20 encryption aes

isakmp policy 20 hash sha

isakmp policy 20 group 2

isakmp policy 20 lifetime 86400

telnet timeout 60

-----------------------------------

CPU used near 20 %

Memore - 70%

--------------------------

I'm not shure which AES i used- 128 or 256?

How many VPNs are running on the 501?

You are using 128-bit encryption for IPSec.

(crypto ipsec transform-set AES esp-aes esp-sha-hmac ). I haven't found the isakmp encryption to play a major role in slowdowns because that happens fairly quickly and infrequently.

As a test, create a test transform set for des encryption on both Pix's-

"crypto ipsec transform-set des-test esp-des esp-sha-hmac"

then change the encryption on the transform-set of each pix to des

no crypto map MOSCOW 10 set transform-set AES

crypto map MOSCOW 10 set transform-set des-test

This must be done on both Pix's and will lower your VPN encryption from AES-128 to 64-bit DES. You could, as a test, remove encryption all together to see what effect it has.

Onle 1 VPN are running on the 501.

I tryed to use des encryption but it didn't help.