12-09-2004 08:58 AM
I have setup a site to site vpn between a pix 501 and checkpoint ngai firewall R55. Everything works fine except for web browsing. Our internal proxy server uses port 8080 and no where in the logs for the vpn can i see an entry for http on port 8080. Is there something in the pix i need to cahnge or setup to allow http on 8080 through the vpn.
At the moment my rules allow anything from the remote net ro the local net
Thanks
12-13-2004 05:08 AM
Hello,
If you have opened IP communication between the two sites, it should work, unless you arent blocking anyting on the inside interface of the PIX. if you have any access-list on the inside, just allow port 8080 to go out through VPN. Just check the same on the other end too.
by the way, are you able to ping between the two sites ?
12-23-2004 11:25 PM
Hi, Would you be able to shared with me the configuration setting on Checkpoint for the VPN connection?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide