So I have a Cisco 3925 Router, Maxed out on Ram, Very few Users (3) plenty of Internet.
I have been doing alot of reading and gathering of info on VPN (IPSEC)
- I would like to do the Authentication of the Users on the Router ( No Radius)
Total memory size = 4096 MB - DIMM0 = 2048 MB, DIMM1 = 2048 MB
CISCO3925-CHASSIS with C3900-SPE100/K9 with 4194304 Kbytes of main memory
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.7(3)M6, RELEASE SOFTWARE (fc1)
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
1 Cisco Embedded service engine(s)
1 Cisco ISM Crypto Engine(s)
- IPBasek9, Securityk9, Uck9, Datak9
- FoundattionSuiteK9, AdvUCSuiteK9, IOS-IPS, HsecK9, CME-SRST, CUBE
- Does anyone have a preference as to a "guide" i should follow when setting this up?
Thanks.......
