remote access vpn

[MandeepDeol]

Hi,

Can anybody help with how to configure remote access ipsec vpn on RV042G Dual WAN VPN router.

Thank you

Regards,

Mandeep

[balaji.bandi]

example guides as below to start with ;

https://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=e59b1a289c8b4604ae7ff87f979571f5_Set_Up_a_Remote_Access_Tunnel_for_VPN_Clients_.xml

https://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=48bae2731b2b4b42a99bec6848cfa954_Setting_up_a_VPN_Tunnel_on_Two_Linksys_Routers_RV082.xml&

[MandeepDeol]

Hi , 

Is client to gateway vpn is remote access client vpn.

As I set up tunnel and configured it and try to connect from my laptop through cisco anyconnect and quickvpn client but I am not able to connect.

Thanks

[balaji.bandi]

what is the error you getting, what is the logs you see on the device where VPN you like to terminate.

Post the configuration also

[MandeepDeol]

Hi BB,

1. I added a new tunnel with outside interface (WAN 1)

2. Local Security group : local security gateway type - I selected IP only and it comes up with Public ip of router

and local security group type I choose the subnet and add 192.168.x.0/24 subnet

3. Remote Client set up : remote security gateway type - I chose IP only and add the publc ip add (my ip add) of my client laptop

4. IPsec set up - I chose IKE with preshared key option and enter respective authentication and encryption protocols and created the preshared key and enabled and saved it.

And I also created the user on Vpn client access tab.

But when I went to vpn summary tab, I noticed status for vpn tunnel waiting for connection and am not able to connect through vpn 

I tried to connect on my client laptop thriugh cisco anyconnect it does not allow connection.Its hows me message Connection attempt failed.Please try again.

I also tried  through cisco quick vpn it also show connection failed

Thank you 

Regards,

Mandeep

[balaji.bandi]

Suggest to look at message history for more logs - that is generic error.

What is your operating system version and AnyConnect version?

For testing : can you try https://remote-vpn-ip-url:443 ? what is the results ?