12-06-2010 10:30 PM
I want to connect H/O to branch office which is 250m apart. head office have two 2MB adsl connections . other remote locations connect to H/O through VPN .
Connection using Fibre cabling is not possible here. How can i connect this branch to H/O ?
What are the different options and the lowest cost option?
Thanx
12-07-2010 11:08 AM
12-07-2010 07:50 PM
Thanx . prefered solution here is a wireless connectivity. How can this be done with minimum cost?
12-07-2010 03:36 PM
There is a lot of variables here. You need to consider your support teams knowledge, upfront cost vs. ongoing expenses, SLAs, traffic profile, etc.
The aboved mentioned options are the cheapest providing you have the skills to implement and maintain them. If you go for option 2 mentioned above, ensure your ISP service suits your needs. Eg. an asynchornous (ie. ADSL) might not be suitable for your traffic profile. The type of service you choose will depend on your traffic requirements, budget, and ISP. Eg. If you use VoIP or similar low-latency systems this wont cut the cake.
If you need low latency, dont have the skills for either of the above options, or capital budget is low (as opposed to operating budget) then I'd suggest looking at a MAN service. Ethernet is the easiest but the most epensive. DSL and wireless are a little cheaper but may still be suitable.
Rgds
Scott
12-07-2010 08:00 PM
hI scott
this will be a basic setup without VOIP, or higer bandwidth traffic. requirement is to connect H/O LAN to this branch with a wireless connection consuming Lowest cost possible. branch network requires internet access as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide