12-09-2016 06:33 AM
I want to set up a separate group policy for VPN users so when they connect and they are under this policy they only have access to that one or two servers on the network and not the whole network. The problem is I've never set up a group policy before and don't even know how to set one up with these options.
Solved! Go to Solution.
12-09-2016 11:21 AM
Hello Joseph-
Here is a list of links that I use when it comes to ASA help:
- A very good blog entry for VPN-Filters (Which is what you will need to configure):
https://popravak.wordpress.com/2011/11/05/cisco-asa-vpn-filter-as-i-see-it/
- ASA Configuration Guide:
- Lab Minutes. Very good security based videos.
http://www.labminutes.com/video/sec
I hope this helps!
Thank you for rating helpful posts!
12-09-2016 11:21 AM
Hello Joseph-
Here is a list of links that I use when it comes to ASA help:
- A very good blog entry for VPN-Filters (Which is what you will need to configure):
https://popravak.wordpress.com/2011/11/05/cisco-asa-vpn-filter-as-i-see-it/
- ASA Configuration Guide:
- Lab Minutes. Very good security based videos.
http://www.labminutes.com/video/sec
I hope this helps!
Thank you for rating helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide