12-09-2018 02:38 PM - edited 12-09-2018 02:40 PM
Hey all,
I am going through the process of cutting over from a pfsense firewall to an ASA. I have done some test cutovers outside of hours and have fixed a number of configuration issues however I am stuck on one.
I cannot seem to get the Site to Site VPNs to establish a connection. The other endpoints are Draytek routers.
The error message I am getting it (IPs modified):
"%ASA-7-710005: UDP request discarded from 1.1.1.1/33524 to WAN:2.2.2.2/500"
Sanitized config is attached.
Any assistance would be great, I am starting to pull my hair out over this one!
Thank you,
Steven
Solved! Go to Solution.
12-09-2018 07:42 PM
May have found the issue on this. Whilst troubleshooting some issues I disabled ikev1&2 on WAN '=(, which would explain why the ASA was not replying.
I have added the following and will test tomorrow morning.
crypto ikev2 enable WAN
crypto ikev1 enable WAN
I am hoping this issue was just a silly oversight by me whilst looking over other issues. I will report back tomorrow and advise.
Thank you,
Steven
12-10-2018 01:34 PM
Ok, so was able to get some more useful logs this morning. There were a couple of IKE mismatches, but once I fixed this up I was good to go.
So initial issue was just me overlooking a basic setting.
Thank you,
Steven
12-09-2018 07:42 PM
May have found the issue on this. Whilst troubleshooting some issues I disabled ikev1&2 on WAN '=(, which would explain why the ASA was not replying.
I have added the following and will test tomorrow morning.
crypto ikev2 enable WAN
crypto ikev1 enable WAN
I am hoping this issue was just a silly oversight by me whilst looking over other issues. I will report back tomorrow and advise.
Thank you,
Steven
12-10-2018 01:34 PM
Ok, so was able to get some more useful logs this morning. There were a couple of IKE mismatches, but once I fixed this up I was good to go.
So initial issue was just me overlooking a basic setting.
Thank you,
Steven
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide