11-22-2011 11:36 PM
Hello Guys .
i created site to site Vpn
Site A
--
Inside 192.168.1.1
outside 155.155.155.10
Inside Host 192.168.1.10
Gataway = 192.168.1.1
Site B
------
inside 172.16.16.1
outside 200.200.200.10
host - 172.16.16.2
gateway 172.16.16.1
This Secenerio is Working no problem at all.
My Problem is
Site A
--
Inside 192.168.1.1
outside 155.155.155.10
Switch = Host 192.168.1.10
Site B
------
inside 172.16.16.1
outside 200.200.200.10
Switch- 172.16.16.2
So here how i can configure because with out gatway i can't reach my inside networks. here iam using a switch's the first scenerio was host issuse
Solved! Go to Solution.
11-23-2011 05:37 AM
11-22-2011 11:40 PM
what is the problem?
Sent from Cisco Technical Support iPad App
11-22-2011 11:43 PM
Hi,
ASA (Inside-172.16.16.1)-------------- Switch (172.16.16.2)-------- Hosts for ex- 172.16.16.3
172.16.16.2 can be used for switch management and for rest of the host 172.16.16.1 still be the gateway. You have to configure default route on switch which will be 172.16.16.1
Thanks
Ajay
11-23-2011 05:35 AM
Thank ajay . but iam using layer 2 .switch . cisco catalayst 2950 . so what is the solution and how i can route that
11-23-2011 05:37 AM
As I said if you go that way nothing else is required.
Thanks
Ajay
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide