Site to Site VPN LAB ASAv

[Cisco7777]

Hello everyone,

i am trying to setup a Site to Site VPN between an ASAv1 and ASAv2. The simulation I am using based on ASAv images. Below my network topology.

My goal is to establish Site to Site VPN  and provide Internet access for PC1 and PC2. Kindly help to solve a question. I'm attaching ASAv1, ASAv2 and Router configs.

[Rahul Govindan]

What is your question? Did you try configuring the ASA's and run into an issue?

Use this guide as reference to set up internet access for users:

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz-00.html#anc11

Use the following guide as reference to set up Site to Site VPN on the ASA's:

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/119141-configure-asa-00.html

[balaji.bandi]

ASDM give you step by step procedure for creating VPN Site to Site

below full example help you to start with.

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/113486-ikev2-s2s-tunnel-00.html

BB