cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
369
Views
0
Helpful
2
Replies
Highlighted
Beginner

Site to Site VPN LAB ASAv

Hello everyone,

 

i am trying to setup a Site to Site VPN between an ASAv1 and ASAv2. The simulation I am using based on ASAv images. Below my network topology.

LAB.jpg

 

 

My goal is to establish Site to Site VPN  and provide Internet access for PC1 and PC2. Kindly help to solve a question. I'm attaching ASAv1, ASAv2 and Router configs.

 

 

2 REPLIES 2
Highlighted
VIP Advocate

What is your question? Did you try configuring the ASA's and run into an issue?

 

Use this guide as reference to set up internet access for users:

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz-00.html#anc11

 

Use the following guide as reference to set up Site to Site VPN on the ASA's:

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/119141-configure-asa-00.html

 

 

Highlighted
VIP Mentor

ASDM give you step by step procedure for creating VPN Site to Site

below full example help you to start with.

 

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/113486-ikev2-s2s-tunnel-00.html

 

BB

BB
*** Rate All Helpful Responses ***
Content for Community-Ad