site to site VPN problem

[zachlin19381]

I config site to site VPN on FTD with FDM

I use the packet tracer command to test the connectivity to ASA and run the command twice  but I got this information.

I don't know about this.

[balaji.bandi]

can you check first is the VPN tunnel up and running

use below diag commands verify.

https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/215513-configure-site-to-site-vpn-on-ftd-manage.html#anc11

https://www.petenetlive.com/kb/article/0001681

[zachlin19381]

The tunnel is not working so I ask this question. 
I don’t know how to do troubleshooting. I have checked the Ike policy and IPSec proposal and do whatever the link you provided.

this is what I got using show crypto isa command.

[balaji.bandi]

I do not see any active tunnels, i would suggest to spend some time read the guide and follow some steps - you need to understand the process how it works.

or explain what you have done each step by step for us to understand what you have done the setup.