There is a linksys vpn router rv402 in brach,which connect to internet using adsl with a dynamic ip address.It is a Cisco 3745 router in central office.
I config the Cisco 3745 router follow the sample in this article http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml
In linksys it is very sample ,I choose IP Only and enter the Central vpn ip address ,and correct phase 1 ande phase 2 parameters.
There is a problem when the linksys try to connect the router.Phase 1 is complete.But there is a error in 3745 router in phase 2.
3d18h: ISAKMP (0:111): atts are acceptable.
3d18h: ISAKMP (0:111): processing NONCE payload. message ID = 1288454980
3d18h: ISAKMP (0:111): processing KE payload. message ID = 1288454980
3d18h: ISAKMP (0:111): processing ID payload. message ID = 1288454980
3d18h: ISAKMP (111): unknown src id_type 7
3d18h: ISAKMP (0:111): deleting node 1288454980 error TRUE reason "quick mode re
jected"
3d18h: ISAKMP (0:111): Unknown Input IKE_MESG_FROM_PEER, IKE_QM_EXCH: for node
1288454980: state = IKE_QM_READY
3d18h: ISAKMP (0:111): Node 1288454980, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH
3d18h: ISAKMP (0:111): Old State = IKE_QM_READY New State = IKE_QM_READY
