04-19-2010 03:48 AM
Solved! Go to Solution.
04-19-2010 04:16 AM
PPTP split tunnel is to be configured on the client's end. Unlike IPSec split tunnel which is performed on the head end, PPTP split tunnel is configured on the client itself.
Here is the configuration guide from the Q&A document (second last question):
http://www.cisco.com/en/US/partner/tech/tk827/tk369/technologies_q_and_a_item09186a00800946ef.shtml
Here is an article from Microsoft that supports that:
http://technet.microsoft.com/en-us/library/cc779919%28WS.10%29.aspx#w2k3tr_vpn_how_dkma
Hope that helps.
04-19-2010 04:16 AM
PPTP split tunnel is to be configured on the client's end. Unlike IPSec split tunnel which is performed on the head end, PPTP split tunnel is configured on the client itself.
Here is the configuration guide from the Q&A document (second last question):
http://www.cisco.com/en/US/partner/tech/tk827/tk369/technologies_q_and_a_item09186a00800946ef.shtml
Here is an article from Microsoft that supports that:
http://technet.microsoft.com/en-us/library/cc779919%28WS.10%29.aspx#w2k3tr_vpn_how_dkma
Hope that helps.
04-19-2010 05:30 AM
That was a lot easier then I had anticipated.
Thanks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: