VPN

hi ,i ve configured my vpn and i can connect via vpn client to the private network but  i could't ping it though   ,it gives me this message on my routerMay 31 11:04:39.561: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/de...

ASA5510 with ASDM6.3Anyconnect is working fine. We allready had a certificate for our external IP adress so we specified AnyConnect to use a different port and bought a certificate for that.Ive created a XML profile to be pushed to the clients. The p...

We have 3 VPN concetrators and an ASA 5520.  My first question is, can we do SSL VPN with a Cisco ASA now?  Do I need any specific Cisco software to accomplish this?  And does it come with a product similar to host checker so one can perform NAC func...

Hi, have the following situation:_ VDSL 20'000/1'000 internet connection_ VDSL bridge (zyxel P-870M)_ router Cisco 871 (Advanced IP Services)Assigned subnet from ISPSubnet: xxx.yyy.zzz.248Router IP: xxx.yyy.zzz.249Available IPs: xxx.yyy.zzz.250 .. xx...

I already use a Netscreen for my site-to-site VPN's and I would like to implement an ASA to handle the remote access client VPN's. Has anyone done this before?  If so how would I go about doing it? Hang the ASA off one my netscreen ports?

I am in the middle of labbing a DMVPN environment and after getting it working with PSK, I have got it working with certificates by setting up a Cisco IOS Certificate Server and enrolling all routers.I have noticed that my router identity certificate...

I am trying to find out the bandwidth of the WAN link required at a datacenter WAN gateway where PCs at 60 remote sites establish SSL-VPN tunnel to this gateway. Each user will have 512kbps bandwidth to the internet.Assuming, all the 60 sites will be...

Good day everyone,I have a situation that has been nagging at me all day.  I'm trying to setup a DMVPN with a 7606 using an IPSEC SPA on one end and a 2431 on the cpe end.  The complication seems to be surrounding the implementation on the 7606.  We ...

bonjour, mon probleme c est que je doit utiliser deux fois le nat dan ma configuration  :!:  :!: une j ai utilisé pour le vpn pour mont client vpn(PAT),le problkem c estacause du pool que jai affecter a mon client ne pau pa acceder ai backbon de la ...

Dear List,I have just installed an Out Of Band network in case  of major crashes for our company.The architecture is the  following :3 Cisco 2600 routers geared with async NM32 modules  and octal cables. Each console is connected to the console port ...