Splitting VPN Traffic

[stephen.parker]

We currently have two 1720VPN routers doing site to site traffic. On one of the routers we wish to split the network traffic through two ISDN lines. We have installed two wic 1enet cards one for each IDSN. We have a default route where all traffic will pass through onto one of ISDN. Nat is also in use.

Any one got any ideas how I can split the traffic so the VPN goes through one ISDN and internet traffic through the other? Both wic 1 enet cards have valid Internet addresses

[noc]

research policy routing.. it is just what you need.

(you will apply the ip policy) on the interface

facing the source of the traffic (i.e. lan would be

f0 on a 1720)

http://www.cisco.com/warp/public/105/36.html